Itho Daalderop CVE ECO malfunction
Itho CVE ECO no longer running
Is your Itho CVE ECO no longer running, is the ventilation unit unresponsive, or do you notice that there's hardly any extraction anymore? The cause could lie with the motor, bearings, capacitor, or control system. On this page, you can read what you can check and when repair or overhaul is possible.
- No or little extraction
- Motor does not start
- Possible overhaul or repair
What do you notice?
- The ventilation unit no longer makes a rotating sound.
- There is little to no extraction in the bathroom, kitchen, or toilet.
- The ventilation unit no longer responds to controls or the switch.
- The motor may still hum, but it doesn't start.
Possible causes
- The bearings are worn or the motor is stiff.
- The capacitor or electronic control is not functioning correctly.
- The motor plate or ventilation motor is defective.
- Contamination or wear causes blockage or imbalance.
What can you safely check yourself?
First, check if the ventilation unit is powered and if the controls are working correctly. Then listen if the motor remains completely silent, hums, or tries to start. Always de-energize the ventilation unit before opening or inspecting the unit.
Are you unsure about the cause?
Use our troubleshooter to determine, step by step, which malfunction best fits your situation.
Start the troubleshooterWhen is an overhaul possible?
An overhaul is often worthwhile when the casing is still in good condition, and mainly the motor or rotating parts are worn. During an overhaul, parts are checked and replaced where necessary, so that the ventilation unit can function reliably again.
Choose the right solution
Is your problem or model not listed?
Use our troubleshooter or parts finder. We are happy to help you find the right solution.
Start troubleshooting Search for parts